Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Delray Beach
Electric gate repair in Delray Beach typically runs $180 – $540 depending on whether we’re replacing a control board, an operator arm, or a rusted hinge post near the Intracoastal. Most repairs in Delray Beach are completed the same day we arrive, and we schedule service calls throughout 33447, 33448, 33482, and 33483 every weekday. Call (855) 360-5979 for a free estimate and an honest diagnosis before any work begins.
We know Delray Beach gates the way only a specialist can. East-side properties near the beach and Intracoastal contend with salt-air corrosion that eats operator housings years before inland gates show any wear at all. West of I-95, gated communities like Kings Point and Huntington Lakes run on HOA access-control standards that require brand-exact replacements. One-size-fits-all advice doesn’t hold up here, and we don’t offer it.
Why Sovereign Gate Repair Is Delray Beach’s Preferred Electric Gate Repair Company
Delray Beach homeowners and property managers call us because we work on the brand they already have, not the brand we’d prefer to sell them. Our technicians are factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in a city where HOA boards in communities like Kings Point require exact operator and safety sensor replacements. A mismatched part fails inspection. We get it right the first time because we know the systems, not just the symptom.
Delray Beach customers tell us the same thing repeatedly: other companies said the gate had to be replaced. We repaired it. Electric gate diagnostics, not just mechanical fixes, is the core of what we do. A rusted hinge post on a LiftMaster swing gate near the Intracoastal isn’t a reason to replace the whole system. It’s a reason to correct the post and keep the operator running. That’s the standard Len Cavaretta built Sovereign Gate Repair on: complete solutions, not temporary patches.
Our response time to Delray Beach is measured in hours, not days. We keep parts for the nine brands we service stocked locally, which means fewer return trips and faster turnarounds for gates from Mighty Mule residential openers to FAAC commercial operators. When a shared driveway gate in Villages of Oriole sticks closed on a Tuesday morning, you need a technician who shows up prepared. We do.
Styles & brands we work with
Automatic Gate Repair in Delray Beach
Automatic Gate Repair in Delray Beach is a job we step into more often than most people expect, because an automated gate that won’t open or close cleanly is a security failure, not just an inconvenience. Automatic gate repair here means diagnosing the operator, the control board, the loop detector, the safety edges, and the physical gate itself as one connected system. On an east-side property near the Intracoastal, that often means replacing a corroded circuit board and a rusted arm. West of I-95, it’s more likely a power blip from a summer storm killed the panel, or a photocell got knocked out of alignment. The most common sub-services we handle under this umbrella are gate motor repair, opener repair, keypad repair, remote control repair, safety sensor repair, and control board repair.
You’ll know you need automatic gate repair when the gate hesitates, reverses for no reason, or stops responding to remotes and keypads consistently. In Delray Beach, seasonal lightning and humidity accelerate electrical gremlins. A typical automatic gate repair in Delray Beach runs $180 – $540, though rust damage on east-side coastal gates can push a hinge post or operator replacement higher, and we quote every dollar before work starts.
Opener and Motor Diagnostics
Most Delray Beach callers describe the same thing: the gate was fine yesterday, and today it’s dead or grinding. We start with the operator and power supply, then work through the control board and limit switches. On a Mighty Mule residential system, a bad capacitor or a worn gear sounds terrible but is often a quick fix. On a Viking or Elite commercial operator, a control board fault after a lightning strike is usually a replacement, not a reset.
Keypad and Remote Access Repair
Access systems in Delray Beach take abuse from sun, salt, and daily use. Keypad buttons wear, remotes lose programming after power interruptions, and older intercom or telephone-entry systems fail without warning. We reprogram, replace, or rewire the access side of the gate while keeping the gate itself operational, so your entry point keeps working during the repair.
Electric Gate Motor in Delray Beach
Electric Gate Motor replacement in Delray Beach usually costs $350 – $850 depending on whether it’s a residential swing arm on a concrete-block ranch east of I-95 or a commercial slide operator in a gated community west of I-95. The motor is the muscle of the system, and in Delray Beach, it lives in one of the harsher environments for electrical equipment: humid salt air, hurricane-season power surges, and relentless UV exposure. We replace motors on every brand we service, including FAAC, BFT, Linear, DoorKing, and Ghost Controls, and we always confirm the replacement matches the HOA’s approved list when one applies.
Signs of a failing electric gate motor in Delray Beach include the gate moving slower than it used to, humming without movement, or tripping its breaker. If the gate stalls partway and the motor housing feels hot after a short run, the windings may be on their way out. We test before we recommend replacement. If the motor can be rebuilt or a capacitor swap fixes it, we’ll say so. A gate that fails again isn’t a repair, it’s a callback.
Salt-Air Motor Failures East of I-95
East-side Delray Beach gates near the Intracoastal and beach fail from salt-air corrosion years before inland gates west of I-95. The same electric gate repair job might mean replacing a rusted operator and hinges on the east side while an inland gate just needs a control board reset. We’ve pulled motors near the Intracoastal where the housing was so rusted the mounting bolts snapped during removal.
Power and Control Board Resets After Storms
Hurricane-season lightning and power blips frequently knock out gate control panels across Delray Beach. We see slide gates stuck open or closed in tight shared driveways where a swing gate won’t fit, and in those situations the control board is often the culprit. Resetting is sometimes enough. Replacing a fried board is often the real fix. We diagnose the board, not the symptom.
Trusted Brands We Service in Delray Beach
We work on the brand you already have. In Delray Beach, we see Viking slide operators on older estate properties, Ghost Controls openers on DIY-installed residential gates, DoorKing access systems at small commercial lots, and Elite swing arms on custom aluminum gates across the city. We’re certified to service all nine gate brands we stock for: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Since we stock local parts for Delray Beach jobs, from control boards to safety photocells to remote transmitters, turnarounds stay short and you’re not waiting on a single-brand dealer’s parts lead time.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Delray Beach Homes
- Salt-air rust on operator housings and hinge posts: East-side homes near the Intracoastal and Ocean Boulevard show rust on operators, hinges, and chains years before inland properties. We regularly replace rusted hinge posts that cause the gate to sag and drag, not the panel itself.
- HOA inspection failures from mismatched parts: Communities like Kings Point and Huntington Lakes require exact replacement of operator brands and safety photocells. We’ve seen repairs fail inspection because a handyman installed a generic sensor instead of the approved model, and the whole gate got red-tagged.
- Power disruption damage during hurricane season: Lightning strikes and power blips knock out gate control panels often enough that we keep common boards stocked for Delray Beach callouts. Slide gates stuck in tight shared driveways are a frequent August and September call.
- Aging swing and slide models on 1950s – 1970s homes: Many Delray Beach homes east of I-95 were built between the 1950s and 1970s and still run aging swing or slide gate models with original control boards. Those boards fail gradually, and the gate starts acting erratically before it dies completely.
Pricing for Electric Gate Repair in Delray Beach, FL
Here’s what we see on real Delray Beach invoices. Gate motor repair runs $350 – $850. Control board replacement runs $180 – $420. Safety sensor or photocell repair runs $120 – $260. Remote and keypad programming runs $90 – $180 per unit. Hinge post correction on a rusted east-side gate runs $300 – $700 depending on whether the post needs concrete work or just realignment. Full operator replacement on a gated community sliding gate can run $1,200 – $3,800, but that’s an installation job, not a patch. We quote the full price and get your agreement before any work starts, and estimates are free. Call (855) 360-5979 for an exact number on your gate.
We Also Serve Cities Near Delray Beach
Sovereign Gate Repair covers Delray Beach and the surrounding communities, including Kings Point, Highland Beach, Villages of Oriole, and Boynton Beach. If you’re in one of those areas and need Electric Gate Repair, the same multi-brand team serves your gate system. For our Delray Beach service area details, see Electric Gate Repair in Delray Beach.
Serving Delray Beach, FL — Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Delray Beach
East-side Delray Beach gates near the Intracoastal rust faster because salt-laden onshore breezes and year-round humidity coat operator housings, hinges, and chains with a corrosive layer that inland gates west of I-95 simply don’t get. The same repair that’s a control board reset inland often becomes an operator and hinge replacement on the east side. We inspect for rust damage on every east-side Delray Beach call, because catching it early saves the operator. Call (855) 360-5979 to schedule a look before the rust wins.
Yes. We replace or repair your electric gate using the exact operator brand and safety photocell models your HOA has approved, so the repair passes inspection the first time. We work on Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule, which covers nearly every HOA-approved list in the Delray Beach area. If your Kings Point HOA needs specific documentation, we can provide the brand and model details for your board’s records. Call (855) 360-5979 and we’ll coordinate with your property manager.
First, don’t force the gate manually if the motor is engaged, you can strip gears or bend the rack. Second, turn off the operator power switch if it’s safe to reach, then call us. A slide gate stuck in a Delray Beach shared driveway, especially in tight spaces where a swing gate won’t fit, is usually a control board failure, a loop detector fault, or a power interruption from a storm. We’ll diagnose it on-site and get the gate moving without blocking access longer than necessary. Call (855) 360-5979 for same-day scheduling.
Look at the gap between the gate and the post: if it’s wider at the top than the bottom, the post is usually leaning from rust or ground shift, not the panel bending. On Delray Beach east-side homes near the Intracoastal, rusty hinge posts are a frequent cause of sagging gates that drag on the driveway. In one case near the Intracoastal, a homeowner’s LiftMaster swing gate had corroded circuit boards and a rusty hinge post; we replaced the operator and corrected the sag at the hinge post, not the panel, and the gate ran clean. If your gate is dragging, call (855) 360-5979 and we’ll check the post before anyone sells you a new gate.
Yes, automatic gates in Delray Beach need working entrapment protection, such as safety edges, photocells, or an inherent reversing mechanism on the operator. In Delray Beach, HOAs and local code enforcement take this seriously, and a gate that reverses too hard or fails to stop on contact is a safety violation, not just a nuisance. We test the safety edges and photocells on every electric gate repair visit. If yours hasn’t been tested in years, call (855) 360-5979 and we’ll check it during the same visit.
Written by Len Cavaretta, Owner at Sovereign Gate Repair, serving Delray Beach and Palm Beach County.