Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across The Acreage
Gate repair in The Acreage runs $220 – $1,850 depending on whether we’re straightening a sagging ranch gate or replacing the control board on an automatic driveway operator. Most repairs we complete in one visit because our trucks carry boards, hinges, and hardware for the brands already hung on local properties. If your gate swings wrong, won’t open, or the post is pulling loose in sandy soil, call (855) 360-5979 and we’ll give you a straight answer on what’s fixable.
We know The Acreage isn’t a subdivision with curbs and streetlights. It’s a spread-out equestrian-residential community where gates do real work: holding horses, marking property lines off 60th Street North and Orange Boulevard, and securing homes that sit hundreds of feet from the road. Len Cavaretta built Sovereign Gate Repair to handle exactly this kind of territory, where a gate failure isn’t a minor annoyance. It’s a security opening or a loose horse waiting to happen.
Why Sovereign Gate Repair Is The Acreage’s Preferred Gate Repair Company
The Acreage has a particular gate problem most repair companies don’t understand: the same property might have a decorative aluminum driveway gate and a 14-foot livestock gate hung on an arena fence. Both should open cleanly. Both should hold their line. Most companies treat them differently or walk away from the second one entirely. We don’t.
We work on the brand you already have, whether it’s a Mighty Mule opener someone bought at a farm supply store or a commercial-grade FAAC operator controlling access to a multi-acre equestrian property. Residents off Coconut Boulevard and 140th Avenue North call us because we diagnose electric failures at the board level, not just the hinge level. A gate that fails again isn’t a repair. It’s a callback, and callbacks cost you another day without a working gate.
Our service area includes all of ZIP code 33412, from the northern stretches near Northlake Boulevard south toward Loxahatchee. When a summer storm knocks out your gate operator board, you need someone who can reach you the same day with the right part on the truck, not someone who quotes a week out.
Styles & brands we work with
Metal Gate Repair in The Acreage
Metal Gate Repair in The Acreage typically means steel or aluminum swing gates, many of them long ranch-style entry gates built to span wide driveway openings and hold up to years of sun, rain, and the occasional horse rubbing against a post. The job usually involves one of three things: resetting a hinge post that has shifted in sandy soil, replacing hinges or bolts that have worn oblong, or welding cracks where the frame flexed under its own weight. Basic hinge replacement and realignment on a standard metal driveway gate in The Acreage runs $250 – $450. A significant post reset with new concrete footing usually lands between $500 and $900 depending on the length of the gate and whether we’re also correcting years of accumulated sag.
Ranch and Livestock Gates
The Acreage has more long swing gates per mile than almost any community we serve. These gates are heavy, wide, and often mounted on posts that were set decades ago in loose, sandy ground. When a hinge post leans, the latch end drops, and the gate starts dragging. We reset the footing in concrete, replace the worn hinge hardware, and correct the gate’s geometry so the operator isn’t fighting a misaligned load.
Automatic Metal Driveway Gates
An aluminum or steel driveway gate with a LiftMaster or Elite operator needs both the mechanical side and the electrical side working together. We see metal gates where the gate itself is fine but the operator arm has pulled screws loose from years of storm winds. We repair the mounting, re-align the travel limits, and check the control board for the damage South Florida lightning often leaves behind.
Wood Gate Repair in The Acreage
Wood Gate Repair in The Acreage usually means post-and-rail or plank gates on horse fences, pasture entrances, and older ranch properties where the gate was built to match the fence line. Wood gates here fail differently than metal ones: rot at the hinge bolts, split rails, and posts that lean because sand doesn’t hold a footing the way clay soil would. A basic wood gate re-hang with new hinges and a tightened frame in The Acreage runs $200 – $400. Replacing a rotted post and resetting it in concrete adds another $250 – $500 depending on gate size and whether we’re cutting back the fence rails to match.
Horse Pasture and Arena Gates
A sagging wood gate on a horse pasture isn’t cosmetic. If the latch won’t hold, the gate swings open, and an animal gets out onto 60th Street North. We rebuild the hinge point, often adding a steel post reinforcement or through-bolts where the wood has chewed out around the screws. The goal is a gate that holds its line for years, not months.
Rotted Frame and Post Replacement
South Florida humidity and afternoon thunderstorms keep wood wet more often than dry. Gate frames rot from the inside at the bottom rail and at the hinge side. We cut out the rotted section, sister in new treated lumber or replace the rail entirely, and re-hang the gate with hardware sized for the weight. If the post itself is rotten below ground, full replacement is the honest fix, and we’ll tell you that before we start rather than bolting something over it.
Trusted Brands We Service in The Acreage
We’re factory-familiar with LiftMaster, FAAC, Elite, and Mighty Mule, along with the other brands customers out here have hung over the years. That matters in The Acreage because this community has a mix of DIY-installed openers and professionally commissioned systems, and we can diagnose both. If your Mighty Mule opener won’t respond or your FAAC operator trips its breaker every time it cycles, we troubleshoot the actual problem rather than telling you to replace the whole unit. We stock common control boards, safety photocells, hinges, and receiver parts for these brands, which means many The Acreage repairs happen the same day we arrive. Our Gate Repair technicians are brand-agnostic by design: you keep the system you have, and we make it work.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in The Acreage Homes
- Lightning-fried control boards. Summer thunderstorms in The Acreage send surges through operator wiring and take out control boards, leaving gates stuck open or closed. We replace boards and add surge protection where the wiring allows.
- Sandy soil post shift. Footings set in sand and marl don’t hold like they do in compacted soil. Long gates slowly pull posts inward until the latch misses and the operator strains. We reset posts with deeper concrete footings and correct the gate’s geometry.
- Missing safety photocells and edge sensors. Many gates in The Acreage were installed before modern entrapment protection was standard. We can retrofit safety photocells and edge sensors to older operators, so the gate reverses instead of pushing against a person, animal, or vehicle.
- Rust and corrosion at the hardware. The combination of high humidity and salt-laden air from the coast works on gate hardware year-round. Hinges seize, bolts corrode, and operator arms bind. We replace hardware with corrosion-resistant components and treat the metal around it.
Pricing for Gate Repair in The Acreage, FL
Here is what gate repair actually costs in The Acreage, based on the jobs we do most often. Hinge replacement and gate realignment: $220 – $450. Control board replacement: $300 – $800 depending on the operator brand and board complexity. Post reset with new concrete footing: $500 – $900. Safety photocell or edge sensor retrofit: $180 – $350 per component. Full operator replacement including arm and receiver: $900 – $1,850. Every price is quoted and agreed before any work starts. You will not get an invoice that surprises you. Call (855) 360-5979 and we’ll give you a free estimate over the phone, then confirm the number in writing before we turn a wrench.
We Also Serve Cities Near The Acreage
Our service radius from The Acreage covers Gate Repair in The Acreage and stretches into the surrounding communities. We work regularly in Royal Palm Beach, Palm Beach Gardens, Haverhill, and Lake Belvedere Estates, and we carry the same parts and equipment across the whole western Palm Beach County area. If you’re on the edge of 33412 or in a neighboring town, call and ask; chances are we already have a truck nearby.
Serving The Acreage, FL — Our Local Coverage Area
We’re based in the The Acreage area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in The Acreage
Usually the board can be replaced without replacing the whole operator. Lightning surges in The Acreage work their way through wiring and hit the control board first, while the motor and gearbox are often still fine. We diagnose the board with a meter, source the matching replacement for LiftMaster, FAAC, Elite, or Mighty Mule, and install it on the spot during a single visit. If the surge also damaged the motor windings or the receiver, we’ll tell you that after testing, not before. Call (855) 360-5979 for a free estimate on board replacement.
The fix is a reset footing with concrete and new hinge hardware on a corrected gate line. Sandy soil in The Acreage doesn’t hold a shallow post the way compacted ground does, especially when a 14-foot ranch gate hangs and swings off it. We dig out the old footing, set the post deeper, pour concrete, and let it cure before re-hanging the gate. During that same visit we’ll check the gate’s geometry and align the operator so the new footing doesn’t immediately start leaning again.
Yes, and that’s the main reason we get calls across The Acreage. Most gate companies handle one or the other. We handle both because this community has both on the same property: a pasture gate keeping horses in and an automatic aluminum driveway gate controlling access to the house. Our team is equally comfortable resetting a wood post on an arena fence and replacing a FAAC control board on a driveway operator.
In most cases, yes. Gates hung in the 1980s, 1990s, and early 2000s often lack the safety photocells and edge sensors that are standard now. We can retrofit photocells to older LiftMaster, Mighty Mule, and other operators, which brings the gate closer to modern entrapment protection without replacing the entire system. On a recent job off 60th Street North, we added a safety photocell to a 14-foot ranch gate operator that had none, and the homeowner got the added protection for less than a new system would have cost. Call (855) 360-5979 and we’ll assess what your operator can support.
Here is the honest test: if the post, hinges, and gate frame are structurally sound, repair is almost always the cheaper answer. If the frame is rotting through, the post is split below ground, or the operator is obsolete with no available board, replacement becomes the smarter long-term spend. We quote both options when the situation calls for it, and we’ll never push replacement on you just because we don’t stock your brand. That is the whole point of being brand-agnostic: we fix what’s fixable and tell you straight when it isn’t.
Call (855) 360-5979 today. We’ll talk through what your gate is doing, give you a free estimate, and schedule a stop at your property in The Acreage. You’ll know the price before we start any work.
Written by Len Cavaretta, Owner at Sovereign Gate Repair, serving The Acreage and western Palm Beach County.