Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Palm City, FL | Sovereign Gate Repair
We repair Ghost Controls gate operators across Palm City, including the TB swing series, solar-ready battery setups, and long-travel slide units. We’re an independent service provider, not a manufacturer shop, so our diagnostics start where the failure actually is: the panel, the charge controller, the board, or the post itself. If your Ghost Controls gate is giving you trouble, there’s a reason, and it’s usually not the one you were told. Call (855) 360-5979 for a free estimate in Palm City.
Why Palm City Residents Choose Us for Ghost Controls Service
Len Cavaretta started working on gate systems in Palm Beach County before most current Ghost Controls models were even on the market. He grew up in West Palm Beach’s Northwood Hills neighborhood, where half the streets dead-ended at a rusted driveway gate, and he studied electrical systems and mechanical technology at Palm Beach State College. That background means our techs don’t just swap parts; we trace the failure back to its source, whether that’s a charge controller corroded by humidity or a post that shifted after twenty years in sandy soil.
Our shop handles Ghost Controls sales & service as one of nine brands we work on every week, alongside LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule. That multi-brand fluency matters because many Palm City properties run more than one operator, and a tech who only knows one brand can’t see when the problem is the shared electrical supply, not the board. We use genuine Ghost Controls boards, actuators, and charge components when the original is serviceable, and quality aftermarket chain, hinges, and hardware where salt air demands something tougher.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Palm City
These are the failures we see repeatedly on Ghost Controls operators in Palm City, and each one ties directly to local conditions:
- Solar panel and battery charging faults. Florida UV cooks solar panels fast, and subtropical humidity corrodes charge-controller terminals. The gate slows or stops mid-travel, and the owner assumes the motor is failing when the real problem is a battery that hasn’t held a full charge in months.
- Surge-fried control boards after afternoon lightning. Palm City’s summer thunderstorms send surges down long wire runs from the house to the gate. Ghost Controls boards and low-voltage transformers at the end of a 300-foot wire run take the hit first, often before a surge protector can clamp it.
- Seized and rust-stretched chains on slide gates. Salt air off the St. Lucie River plus repeated thunderstorm wetting corrodes chain links and limit-switch hardware on long-travel slide operators. The chain stretches, the gate drags, and the limit switches misread.
- Actuator and control-box corrosion from humidity. Ghost Controls actuators sit inside housings that aren’t fully sealed against year-round moisture. Corrosion builds on terminals and connections, and the operator acts dead when the board is actually fine.
- Shifted posts and undersized footings throwing off limits. Many Palm City gates are owner-built on concrete footings poured decades ago for a lighter gate. The post shifts, the gate sags, and the Ghost Controls operator suddenly won’t open or close fully. The operator isn’t the problem; the geometry is.
Ghost Controls Service in Palm City: What Local Conditions Mean for Your Equipment
Palm City is a low-density equestrian and golf community where most driveway and estate gates serve private properties off two-lane ranch roads. These aren’t subdivision gates in tight communities; they’re long-travel sliding and swing gates on rural lots between the Turnpike and the St. Lucie River. Most sit at the end of driveways where trenching 120V power to the gate post is cost-prohibitive, so a large share of the Ghost Controls operators here are solar/DC-battery installs. That changes how we diagnose. We start at the panel, charge controller, and battery, not at the remote or the board, because in Palm City the power source fails before the operator does. Afternoon lightning storms routinely take out low-voltage transformers and control boards on gates whose operators sit at the end of long rural driveways, and many properties run their gates on solar panels and battery backup because trenching power to the gate is too costly. Diagnostics start at the power source.
We got a call from a property off SW Martin Highway near the Turnpike a while back. The owner’s Ghost Controls TB swing operator had gone dead twice in a month after storms. The house is a mile-plus from the gate, and the operator runs on solar with battery backup. Our tech found a sun-bleached panel putting out almost nothing and corroded charge-controller terminals shorting the battery. We replaced the panel and charge controller, cleaned the terminals, re-set the swing limits, and the gate has run through every afternoon storm since.
Ghost Controls Models & Products We Service in Palm City
We work on the full Ghost Controls lineup, including the TB Series swing operators (TB175, TB200), the TDS Series dual-swing operators for heavier gates, the DTP/DIY solar-ready swing kits with battery backup, and the AXS/HD AZR-style slide-gate operators used on long-travel rural slides throughout Palm City. For parts, we use genuine Ghost Controls boards, actuators, and battery/charge components where the original is serviceable, and quality aftermarket chain, hinges, and hardware where it holds up better in salt air. No reason to pay OEM markup on a hinge. We keep common Ghost Controls service parts stocked for faster turnaround in the 34990 and 34991 ZIP codes, which means less waiting for a board to ship when your gate is down.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Palm City
Here’s what Ghost Controls repair typically costs in Palm City, based on the work we’ve done recently:
| Service | Typical Range (Palm City) | Notes |
|---|---|---|
| Diagnostic service call | $75 – $125 | Applied toward repair if you proceed |
| Control board replacement | $220 – $390 | Includes surge protection check |
| Solar panel replacement | $160 – $320 | Depends on panel wattage and mounting |
| Battery replacement (backup) | $110 – $240 | Single or dual battery systems |
| Chain and limit-switch service | $140 – $280 | Slide gates; includes lubrication and adjustment |
| Actuator replacement | $290 – $470 per actuator | TB/TDS series; dual gates may need both |
| Full post re-mount and re-alignment | $400 – $800 | When footings have shifted |
These ranges reflect actual Palm City jobs on Ghost Controls equipment. Your gate may fall outside them depending on age, damage, and whether the operator shares a circuit with other systems. The price is quoted and agreed before any work starts. Call (855) 360-5979 for an exact quote. Estimates are free.
Serving Palm City, FL — Our Local Coverage Area
We’re based in the Palm City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Palm City
No. Sovereign Gate Repair is an independent gate repair shop serving Palm City and surrounding areas. We’re not manufacturer-affiliated or bound to any warranty channel. That independence lets us diagnose the actual failure at the post rather than following a script, and we use genuine Ghost Controls parts where the original is serviceable. Call (855) 360-5979 to schedule a diagnostic.
No-storm failures almost always trace back to the battery or charge controller. In Palm City, the panel degrades from UV exposure, the controller terminals corrode from humidity, and the battery stops holding a charge long before the gate dies completely. The board never gets the voltage it needs. We test panel output, battery voltage, and controller function before touching the motor. Call (855) 360-5979 for a diagnostic service call.
Not usually. The damage is typically confined to the control board, low-voltage transformer, or surge protector, not the entire operator. On Palm City properties where the gate is fed by a long wire run from the house, the board takes the hit first. We replace what was damaged and check the surge protection on the line so the next storm doesn’t do the same thing. Call (855) 360-5979 to have us assess it.
More often than not, it’s the chain and track. Salt air from the St. Lucie River corrodes chain links, and repeated storm wetting seizes them. The motor is working; it’s pulling against rust. We inspect the chain, limit switches, and rail condition first, then lubricate or replace what’s needed. If the track is out of level, that’s a footing or post issue, not an operator problem. Call (855) 360-5979 for a free estimate.
Yes. Many Palm City gates are owner-built with undersized footings and older operators retrofitted onto existing posts. We deal with those regularly. The Ghost Controls operator can often be repaired or serviced in place; the bigger question is whether the post and hinge geometry are still sound. We’ll tell you honestly when a full re-mount beats another board swap. Call (855) 360-5979 and we’ll assess it.
Service Areas Near Palm City
Sovereign Gate Repair serves Palm City and the surrounding communities, including Hobe Sound, Stuart, Jensen Beach, and Port Salerno. We also run Ghost Controls service in Indiantown and Ghost Controls service in Terra Mar for customers on the western and coastal ends of the area, plus Palm City service area coverage for every neighborhood between the Turnpike and the river.
Book Your Ghost Controls Service in Palm City Today
If your Ghost Controls gate is down or dragging, call us at (855) 360-5979. We’ll schedule a diagnostic, walk you through what we find, and quote the repair before any work begins. We work on the brand you already have.
Written by Len Cavaretta, Owner at Sovereign Gate Repair, serving Palm City and Palm Beach County gate systems for over two decades.