Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Juno Beach, FL | Sovereign Gate Repair
We provide independent Ghost Controls gate repair service across Juno Beach, FL (33477), and we handle the solar and low-voltage swing and slide operators on your gate whether the original installer is still around or not. The thing that makes our Ghost Controls work different here is simple: Juno Beach’s salt air and hurricane wind loads attack these operators in ways that inland shops rarely see. We’re not a manufacturer-authorized dealer, and we’ve never needed to be. We fix what’s on your gate, use OEM-spec or better parts where it matters, and tell you straight when a component is worth saving. Call (855) 360-5979 for a free estimate.
Why Juno Beach Residents Choose Us for Ghost Controls Service
Ghost Controls operators are popular along Juno Beach driveways for good reason: the solar-charged battery systems mean no trenching conduit to the house, which matters on older lots where the electrical panel sits far from the gate. But salt air doesn’t care how good the design is. We work on Ghost Controls solar and low-voltage swing and slide operators every week, so we know their control boards, limit-switch behavior, and battery-charging quirks as they actually behave on the coast, not just as they read in a manual. The same expertise goes into every Ghost Controls service in Jupiter we perform.
Len Cavaretta leads our service work. He studied electrical systems and mechanical technology at Palm Beach State College, then spent years on residential and commercial gate installations across Palm Beach County before Ghost Controls operators were even common here. That background matters because most Ghost Controls failures in Juno Beach are electrical or corrosion-related at the connections and boards, not simple mechanical breaks. If a gate’s giving you trouble, there’s a reason, and it’s usually not the one you were told.
We carry Ghost Controls-compatible OEM-spec control boards, solar charging components, battery packs, and arm hardware on the truck, plus marine-grade stainless fasteners that hold up to the A1A salt spray. That same stocked inventory lets us handle Ghost Controls in Tequesta just as efficiently. That keeps most Juno Beach repairs to a single visit.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Juno Beach
- Salt-air corrosion on actuator arms and limit hardware. On oceanfront blocks along A1A, the arm binds before the motor itself fails. The limit switches get pitted, the throw gets short, and the operator reverses. We replace the corroded hardware and free the swing path without condemning a motor that still has life.
- Low-battery faults from solar charging drop-off. Juno Beach’s summer rain cycles and heavy humidity cut into solar input, leaving the Ghost Controls battery chronically undercharged. The gate slows, then stalls, and the board throws a low-battery code that homeowners often misread as a dead motor.
- Storm wind load bending swing arms and knocking gates out of plumb. Hurricane-season gusts hit Juno Beach’s A1A-adjacent properties hard. The operator’s limit settings drift after the gate gets shoved, and the result is a gate that reverses mid-travel or stops without closing.
- Corroded battery-harness connectors and ground terminals. The door you see is a dead board symptom. We find this on older Juno Beach installs regularly: a green-crusted harness connector behind the pedestal that causes intermittent no-open/no-close calls.
- Wrong or missing solar battery capacity for the gate’s weight. A lot of the 1990s-era villas in Juno Beach have original or early-replacement gates that were never paired with enough battery capacity. On overcast weeks the operator gives up by Thursday. We match the battery bank to the actual gate load.
Ghost Controls Service in Juno Beach: What Local Conditions Mean for Your Equipment
The stretch of Juno Beach along A1A and the side streets that run east toward the ocean put operators through a different life than parcels even three blocks west in the same 33477 ZIP. Salt spray settles on the actuator arm, the limit switches, the battery-harness terminals, and the ground straps. In most of South Florida you might inspect those parts annually. On the Juno Beach oceanfront, you’re fighting visible corrosion every six to eight months, and the residential low-rise condos and 1960s era villa communities near the beach don’t have newer gates that are any less affected: many were installed before marine-grade hardware was standard. The result is that Ghost Controls work here gets scheduled around salt-spray exposure, not a flat maintenance interval. This isn’t true in Wellington or Aberdeen, and it isn’t even true in the inland parts of Juno Beach. It’s an A1A reality, and it changes which parts we stock and when we recommend swapping OEM steel for marine-grade fasteners.
We had an A1A-side driveway gate in Juno Beach where the homeowner reported a Ghost Controls dual-swing operator that opened partway and quit. The arm was binding and the board was throwing a low-battery fault. We found a corroded actuator arm, pitted limit hardware, and a solar charging lead that had lost contact behind the pedestal. We freed the swing path, replaced the corroded hardware with marine-grade fasteners, cleaned the charging connection, and reset the limits with a fresh battery pack. The gate has run clean through two storm cycles since.
Ghost Controls Models & Products We Service in Juno Beach
We service the Ghost Controls Heavy-Duty Single Swing (AXS series) solar operators, the Dual Swing (TDS series) for double driveway gates, and the residential slide-gate operator used on many wider Juno Beach entries. We also handle the solar charging kits and battery-harness accessories that run them. When a part needs replacing, we fit Ghost Controls-compatible OEM-spec control boards, arms, and solar battery hardware where that keeps the operator reliable. Where the OEM part is the corrosion weak point, we upgrade to quality aftermarket hinges, brackets, and marine-grade fasteners. If the operator housing and gearbox are still sound, we repair. When the case is rusted through or the gearbox is shot, we’ll tell you replacing the operator is the cheaper long-run call. If you need broader Ghost Controls sales & service support, our team covers that end too.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Juno Beach
Most Ghost Controls repairs in Juno Beach fall into a predictable range once we see the failure, and the same patterns show up when we’re doing Ghost Controls repair in Limestone Creek. What drives the cost is the amount of corrosion we’re undoing, the battery condition, and whether the operator housing itself is still serviceable. A free estimate means we show up, check the battery, arm, and board, and quote you a number before any work starts. You’ll agree to the price before we turn a wrench. Here’s what Juno Beach homeowners typically see:
| Service | Typical Range |
|---|---|
| Diagnostic & limit reset | $90 – $180 |
| Battery replacement (single or dual) | $150 – $420 |
| Actuator arm replacement | $260 – $540 |
| Control board replacement | $310 – $680 |
| Full operator replacement (parts & labor) | $1,150 – $2,600 |
Call (855) 360-5979 for an exact quote. Estimates are free, and the price is agreed before the work begins.
Serving Juno Beach, FL — Our Local Coverage Area
We’re based in the Juno Beach area and know this community well, and we also provide North Palm Beach Ghost Controls service and work throughout the region. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Juno Beach
Yes, if the battery capacity and solar panel are matched to your gate’s weight and your panel is clean and wired properly. The problem we see in Juno Beach is older setups sized for inland sun, then asked to survive weeks of afternoon storms and humidity. The fix is usually a higher-capacity battery bank and cleaned connectors, not a new operator. Call (855) 360-5979 and we’ll check your charging curve.
Wind is pushing against the gate and the operator’s limit settings are already drifting from storm movement. The arm fights the wind, the board reads the resistance as an obstruction, and the gate reverses or stops. We realign the gate, reset the limits, and usually tighten the hinge and mount hardware while we’re there.
Usually not. The arm and limit hardware corrode first, and the motor is still fine. We replace the corroded parts with marine-grade hardware and keep the motor. If the operator housing itself is rusted through, that changes the math. Either way, we’ll show you before we replace anything.
Yes. We’re an independent shop, not a dealer, and we work on operators installed by other companies, by handymen, or by the previous homeowner. We diagnose and repair what’s on your gate whether we installed it or not.
Check whether the gate is visibly leaning or scraping the ground, and whether the arm is still firmly attached at both ends. Don’t try to bend anything back yourself. If the gate opens partway and reverses, or the operator clicks without moving, that’s usually a limit-setting or battery problem. Call (855) 360-5979 and we’ll get eyes on it.
Service Areas Near Juno Beach
Our Juno Beach service covers the 33477 ZIP and the coastline work along A1A. We also take Ghost Controls calls from Hobe Sound, Deerfield Beach, and Boca Raton, and from the communities in between. If you’re in Boca Del Mar, Boca Pointe, or Sandalfoot Cove, we can schedule your visit on the same route. See our Juno Beach service area page for details. For other coverage areas, we also offer Ghost Controls service in Wellington and Ghost Controls service in Aberdeen.
Book Your Ghost Controls Service in Juno Beach Today
If your Ghost Controls gate is binding, stalling, or showing a low-battery fault, call (855) 360-5979 for a free estimate. We carry Ghost Controls-compatible boards, batteries, and arms on the truck, and we repair the operator you have whenever that’s the smart call.
Written by Len Cavaretta, Owner at Sovereign Gate Repair, serving Juno Beach and Palm Beach County since the early 2000s.