Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Haverhill
Electric gate repair in Haverhill typically runs $180 to $540 for most operator and control board fixes, with same-week scheduling available for most residential calls. If your gate won’t open, stays stuck, or grinds when it moves, we diagnose the actual failure and quote the repair before any work begins. Call (855) 360-5979 and we’ll get a technician familiar with Haverhill’s 55+ communities and HOA rules out to your property fast.
We work throughout the 33417 ZIP and know the neighborhoods off Haverhill Road, Belvedere Road, and along the edges of Schall Circle and West Gate. Haverhill’s unincorporated Palm Beach County layout means almost every gate we touch belongs to either a deed-restricted single-family home or a gated retirement community. Different rules, different access expectations, same standard of repair.
Our Electric Gate Repair team handles everything from a dead remote to a full commercial operator replacement. If you’re searching for Electric Gate Repair in Haverhill, you’ll get a specialist, not a handyman who occasionally looks at gates.
Why Sovereign Gate Repair Is Haverhill’s Preferred Electric Gate Repair Company
Haverhill is not a generic Palm Beach County suburb. It is a patchwork of HOA-governed subdivisions, villa courts, and gated 55+ neighborhoods where a gate failure is not just an annoyance, it is a security and mobility problem. Len Cavaretta built Sovereign Gate Repair around that reality. We work on the brand you already have, we do not push replacements when a repair makes sense, and we understand that in Haverhill, the repair often has to match what the association already approved.
Residents here frequently tell us the same thing: another company looked at their gate, said the brand was unsupported, and quoted a full replacement. That rarely happens with us. We are factory-familiar with LiftMaster, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, Ghost Controls, and DoorKing. A power interruption on a Mighty Mule at a villa off Purdy Lane gets the same diagnostic care as a commercial FAAC at a community entrance.
We have worked on gates throughout 33417 long enough to know which corners hold water after a hurricane band passes through and which community boards need a written scope of work before they will approve a repair order. That local fluency saves Haverhill residents weeks of waiting.
Styles & brands we work with
Commercial Gate Operator in Haverhill
Commercial Gate Operator work in Haverhill usually means a shared entrance gate at a 55+ community, a villa association, or a small commercial property off Haverhill Road or Belvedere Road. The operator is the motor and drive unit that moves the gate, and in Haverhill these units run hard: multiple open and close cycles per hour, salt-humidity exposure year round, and occasional abuse from visitor misuse. When one fails, every resident is affected.
A commercial operator replacement or major repair in Haverhill runs $900 to $3,200 depending on brand, gate weight, and whether the control board and safety loops are reused or replaced. We quote the full scope in writing before parts are ordered, and we handle the power wiring, safety edge, loop detector, and access keypad as one complete job.
Shared Entrance Gate Repairs
Community entrance gates need diagnostics that go beyond the motor. We test the loop detector, photo eyes, keypad, and the operator’s internal limits. A gate that slams or reverses randomly is often a failing loop or a corroded limit switch, not a dead motor. We find that and fix it, rather than selling you a motor you did not need.
Operator Retrofit for Older Communities
Many Haverhill communities built in the 1980s and 1990s still run original operators that are now 25 to 40 years old. Manufacturers no longer support some of these boards. Where a direct board replacement is impossible, we retrofit a modern LiftMaster or FAAC operator onto the existing gate and posts, preserving the approved look while restoring reliable operation.
Gate Opener Repair in Haverhill
Gate Opener Repair in Haverhill covers the arm, the motor, the receiver, and the control board on residential swing and slide gates. Most homes in 33417 have wide driveway openings with dual-swing ornamental metal gates or single sliding gates. When the opener fails, the gate either stops dead, reverses mid-cycle, or moves in one direction only. We diagnose that at the board level, not just by listening to the motor.
Residential opener repair in Haverhill runs $180 to $540 for most control board, receiver, and limit switch jobs. Full operator replacements on residential drive gates run $750 to $2,100 when the old unit is too far gone. You get the exact price before we start, and we do not pad the invoice after the gate is working.
Remote and Keypad Failures
A gate opener that works at the wall button but not from the remote is usually a receiver or coding problem, not a motor problem. We re-sync, replace remotes, or install new keypads as needed. For Haverhill’s older residents, we take extra time to pair remotes and keypads correctly and test them from inside the car before we leave.
Battery Backup and Manual Release Checks
In Haverhill’s 55+ communities, battery backup is not optional equipment. It is the difference between getting out and being trapped after a summer storm knocks out power. We test the backup battery, replace expired cells, and verify the manual release works so the gate can be moved by hand when needed.
Trusted Brands We Service in Haverhill
We are factory-familiar with nine gate brands, and in Haverhill we most often see LiftMaster residential operators, Mighty Mule units on DIY-installed older gates, FAAC and BFT on community entrances, and Elite on commercial slide gates. That matters because each brand has its own failure patterns, board layouts, and parts. We carry common control boards, remote receivers, safety sensors, and limit switches in our local service vehicles, so a Haverhill repair is usually done in one trip instead of waiting a week on a shipped part. We work on the brand you already have.
Common Electric Gate Repair Problems We See in Haverhill Homes
- Corroded control boards from salt-laden humidity. The same ocean air that rusts patio furniture eats through control box seals faster in Haverhill than inland. We replace the board and re-seal the enclosure against the next wet season.
- Failure after a power interruption. Many Haverhill gates are on older panels without surge protection. A lightning strike or FPL outage can fry a board instantly. We add surge protection on every board replacement.
- Gates stuck open or closed due to HOA-mandated hardware. When a homeowner installs a non-standard operator or arm style, the association can stall the repair until the hardware matches approved specs. We help residents pick compliant parts before any work starts.
- Slow or grinding operation on aging steel gates. 1980s and 1990s gates on Haverhill’s single-family lots are reaching end of life. Worn rollers, rusted hinges, and tired motors combine to make the gate fight itself. We fix the root cause rather than greasing it and leaving.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Haverhill, FL
Residential gate opener repair in Haverhill runs $180 to $540. Control board replacement runs $280 to $650. Loop detector replacement runs $250 to $600. Commercial operator replacement runs $900 to $3,200 depending on gate length, weight, and brand. Safety sensor and photo eye replacement runs $120 to $260 per set. Every price is quoted and agreed before work starts. Estimates are free. Call (855) 360-5979 for an exact quote on your gate.
We Also Serve Cities Near Haverhill
Our Haverhill service area extends into Lake Belvedere Estates, Plantation Mobile Home Park, Schall Circle, and West Gate. If your community sits on the edge of 33417 or just across the line, we still come out. Call (855) 360-5979 and we will confirm coverage for your address.
Serving Haverhill, FL — Our Local Coverage Area
We’re based in the Haverhill area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Haverhill
A power outage in Haverhill usually kills the control board or drains the battery backup on your gate. The board sees a surge when power returns and fails; a missing or old backup battery then leaves the gate dead. We replace the board, add surge protection, and install a fresh backup battery so the next FPL outage does not leave you locked in or out. Call (855) 360-5979 if your gate stopped after a storm.
Yes. In Haverhill, sagging gates are common on 1980s and 1990s split-level homes where the original hinges and posts have shifted or corroded. We re-hang the gate, replace hinges, and re-square the posts before adjusting the operator. If the operator is still strong, you may not need a full replacement. Call (855) 360-5979 and we will tell you what the gate actually needs.
We do the technical documentation and provide the spec sheets, photos, and written scope of work that Haverhill association boards require before approving a gate repair. We have worked with the architectural review committees throughout 33417 and know what they ask for on operator replacements, finishes, and arm styles. That shortens the approval wait. Call (855) 360-5979 to start the process.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls in Haverhill, DoorKing, Elite, and Mighty Mule. If your community has an older operator from a brand another company refused to touch, we will likely recognize it and have or can source the parts. Call (855) 360-5979 with the model number and we will tell you whether repair is still cost effective.
Photocells on a Haverhill community gate should be checked at least twice a year, and after any significant storm. Salt air film, grass overgrowth, and misalignment from gate vibration are the three most common reasons a community gate reverses or refuses to close. We clean, re-align, and test the sensor’s response as part of any gate service. Call (855) 360-5979 to schedule a safety check.
One More Thing About Haverhill Gates
Haverhill’s 55+ gated communities live with a specific failure pattern that a generic gate repair page misses entirely. The gate is not most likely to fail because the motor wore out. It is most likely to fail because power went out, the battery backup was dead or missing, and the manual release was rusted shut. That leaves a resident stuck on one side of the gate, sometimes in summer heat, sometimes at night. We recently serviced a LiftMaster swing gate operator at a 55+ community off Haverhill Road in the 33417 ZIP. The gate was stuck open and the resident, who spends summers up north, could not close it remotely. We found a corroded control box seal from salt air, replaced the battery backup and keypad entry, and added a loop detector for safety, restoring quiet, reliable access without altering the approved gate style. That is what Sovereign-standard work means in Haverhill: the gate works when the power fails, the HOA is satisfied, and the resident is not stranded.
Written by Len Cavaretta, Owner at Sovereign Gate Repair, serving Haverhill and Palm Beach County.