Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Plantation
Electric gate repair in Plantation typically costs $185 – $540 for most common failures, with control board replacements at the higher end and sensor or keypad fixes at the lower. Our technicians are in Plantation weekly, not occasionally, because this city’s density of gated HOA communities and older estate gates generates steady repair volume. We carry boards, motors, safety sensors, and loop detector parts for the exact brands already installed across Plantation’s 1960s – 1990s subdivisions. When your gate is down, your security isn’t theoretical, it’s physically open. Call (855) 360-5979 and we’ll give you a real diagnosis and an exact price before any work begins, every time.
Led by Len Cavaretta, Sovereign Gate Repair works on the brand you already have, including Viking, Ghost Controls, DoorKing, and Elite systems that single-brand dealers in Broward County often refuse to touch. The name Sovereign reflects how we work here: a gate that fails again isn’t a repair, it’s a callback, and we don’t leave callbacks on Plantation driveways.
Why Sovereign Gate Repair Is Plantation’s Preferred Electric Gate Repair Company
Plantation homeowners and HOA boards call us because the repair is never a guess. When a LiftMaster slide operator on a 1980s community entry gate dies, we know what that control board looks like, what typically kills it, and whether the loop detector in the ground is also compromised. That brand-level familiarity across nine manufacturers means we arrive with a diagnostic plan, not a blank look.
The work we do in Plantation’s gated enclaves off Sunrise Boulevard and University Drive is different from a standalone driveway job. There’s a board involved, often a property manager, sometimes a city permit desk. We communicate in that world fluently. We keep board and property-manager contacts on file, we write short plain-English notes explaining what we found and what we recommend, and we price retrofits against full replacements so a vote isn’t delayed by missing information.
Our Electric Gate Repair team has spent years working on Plantation’s particular stock: late-20th-century operators at end of life, rusted hinge posts on decorative iron gates, and control boards fried by South Florida lightning. That repetition means we’ve already seen your gate’s exact failure, likely in a subdivision two blocks from yours.
Styles & brands we work with
Gate Access Control in Plantation
Gate Access Control in Plantation usually means the full entry system behind the gate itself: the keypad or card reader on the pedestal, the loop detector under the asphalt, the telephone entry unit if the community has one, and the control board tying all of it together. In Plantation’s HOA-heavy landscape, we’re rarely repairing just a motor. We’re often restoring a shared entry that hundreds of residents depend on every morning and evening.
Keypads, Card Readers, and Pedestal Wiring
Plantation’s summer storms flood low-mounted entry pedestals, and salt-laden humidity eats the wiring inside. A keypad that works intermittently after rain is typically a corroded ribbon connector or water ingress in the enclosure. We replace the component, reseal the housing, and test the whole chain from reader to board so you don’t get a callback the next time it pours.
Loop Detectors and Vehicle Sensing
Underground loop detectors in Plantation fail in two predictable ways: lightning takes the controller out, and standing water after a hard storm compromises the loop wire insulation. The symptom is a gate that won’t open on approach, or opens for no reason at 3 a.m. We troubleshoot the loop before condemning it, because often the problem is the detector board, not the buried wire.
Commercial Gate Operator in Plantation
Commercial Gate Operator work in Plantation is not residential work with a bigger motor. A shared community entry gate on the University Drive corridor may cycle hundreds of times a day, and the operator needs to survive that duty cycle in heat, rain, and lightning season. We service commercial-grade FAAC, BFT, DoorKing, and LiftMaster operators with the same diagnostic discipline we bring to a single-family driveway, because a failed commercial operator here doesn’t inconvenience one household, it strands an entire community.
Retrofit vs. Replacement on Aging Commercial Gates
Many Plantation community entries were built in the late 1980s and early 1990s, and their original operators are now past their serviceable life. The honest question is whether a new control board and motor on the existing frame buys another decade, or whether the frame, hinges, and safety system are so worn that replacement is cheaper. We answer that question with numbers, not pressure, and we write it up for the board to review.
UL 325 and Entrapment Safety
Every commercial gate operator in Plantation must meet current UL 325 entrapment protection standards, which older installations often don’t. When we open a 1992 community gate and find no functional photo eyes or an absent edge sensor, we flag it clearly. We can retrofit the safety system onto an existing gate, but we won’t restore power to a gate that can’t pass a basic safety check, regardless of how fast the board wants it open.
Trusted Brands We Service in Plantation
We’re certified to service nine gate brands, and on any given week in Plantation we’ll see Viking, Ghost Controls, DoorKing, and Elite on both residential driveways and commercial entries. Because we stock boards, motors, remote receivers, and safety parts for these systems in our local inventory, Plantation customers aren’t waiting a week for a part to ship from a distributor. From a DIY-installed Mighty Mule on a single-family home to a commercial-grade FAAC or BFT on a community entry, electric gate diagnostics, not just mechanical fixes, is the core of what we do.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Plantation Homes
- Lightning-fried control boards. South Florida’s afternoon thunderstorms produce some of the highest lightning density in the country, and 1980s – 90s boards without modern surge protection are especially vulnerable. A gate that’s dead after a storm usually needs a board swap, not a motor replacement.
- Sagging iron and steel swing gates. In Plantation’s salt-laden humid air, the hinge post rusts at the base, the panel drops, and the gate drags or jams. Adjusting the hinges without addressing the corroded post fixes the symptom once, then it comes back.
- Stormwater in loop detectors and keypad pedestals. Standing water after a heavy summer downpour seeps into underground detector wire and low-mounted entry pads, causing phantom opens, no-opens, and false safety trips. It’s a seasonal pattern we see across Plantation every late August.
- Obsolete boards on HOA entry gates. Many Plantation community gates were installed before modern safety requirements existed, and their original boards are no longer manufactured. We can often retrofit a current board onto the existing frame, but some 30-year-old systems are genuinely at replacement age.
Pricing for Electric Gate Repair in Plantation, FL
A gate motor repair in Plantation runs $220 – $480 depending on the motor type and access. Keypad and remote control repairs typically land between $150 – $300. Safety sensor replacement usually runs $185 – $350 per side. Control board replacement on older systems, which is common across Plantation’s 1980s – 90s housing stock, ranges $320 – $540 including the part and programming. Loop detector replacement runs $250 – $450 when the buried wire is intact and only the controller failed.
What drives cost in Plantation is the age of the system and whether the failure is isolated or cascading. A lightning strike that took a board commonly also damaged the loop detector and a photocell, which changes the job scope. You’ll always get a written price before we begin, and the quote is agreed before any work starts. Call (855) 360-5979 for a free estimate, and we’ll give you a real number, not a range with fine print.
We Also Serve Cities Near Plantation
Sovereign Gate Repair works throughout Broward County. We regularly serve Plantation alongside Fort Lauderdale, Broadview Park, Broward Estates, and Lauderhill. If you’re a property manager or HOA board in one of these neighboring cities with a shared entry gate down, the same team and the same parts inventory apply.
Serving Plantation, FL — Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Plantation
Yes, in most cases a modern control board can be retrofitted onto an existing Plantation gate, provided the operator’s mechanical components and safety edge are still serviceable. The honest test is whether the frame, hinges, motor, and safety system are worth preserving, and we’ll give you that assessment in writing for your board. Call (855) 360-5979 and we’ll inspect the gate and quote both the retrofit and the full replacement so the board can decide with real numbers.
UL 325 is the national safety standard that requires automatic gates to detect an obstruction, usually via photo eyes or an edge sensor, and reverse rather than crush it. Older Plantation gates often lack these protections, and any gate we restore to operation must pass a basic entrapment check or we won’t energize it, no exceptions. We check the safety system on every repair, not as an add-on.
A gate that sags after hinge adjustment almost always has a rusted or weakened hinge post at the base, and Plantation’s salt-laden humidity accelerates exactly that failure on wrought-iron and steel gates. The panel drops because the post is no longer holding it, and fixing the panel without the post means the gate will sag again within months. We address the post first, then rehang the panel square.
After a summer storm in Plantation, the likely cause is standing water in the keypad pedestal or in the underground loop detector wire, often compounded by lightning damage to the controller. The pattern of phantom opens, no-opens, and false safety trips is something we trace to water ingress or a compromised detector board rather than the keypad itself. Call (855) 360-5979 and we’ll pinpoint it before replacing parts that aren’t actually broken.
Tell them to get a written assessment that prices the retrofit honestly against replacement, including what won’t be fixed by the retrofit. On an early-1990s Plantation community gate, if the operator, board, sensors, and frame are all original, replacement is often the cheaper ten-year answer, and we’ll say so plainly. We’ve done enough of these in Plantation to know when a gate is worth saving and when the board is voting on a machine that’s already past end of life.
When your gate is down in Plantation, call (855) 360-5979. We’ll schedule a visit, diagnose the actual fault, and give you a written price before any work starts. Whether it’s a single-family driveway off Broward Boulevard or a shared HOA entry on University Drive, you’ll get the same thing: a real diagnosis, a straight answer, and a repair that holds.
Written by Len Cavaretta, Owner at Sovereign Gate Repair, serving Plantation and Broward County since 2019.