Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Davie
Gate repair in Davie comes down to one thing most homeowners don’t expect: the post, not the operator, is usually the problem. Davie’s sandy, groundwater-heavy soil shifts after every hard rain, and when a post sinks even two inches, a swing gate starts dragging, binding, and eventually refusing to open. We’re Sovereign Gate Repair, led by Len Cavaretta, and we work on the brand you already have, from heavy wooden ranch gates on Orange Drive to automated community entry systems off Griffin Road. If your gate is sagging, grinding, or dead after a storm, call (855) 360-5979 and we’ll diagnose it properly.
Why Sovereign Gate Repair Is Davie’s Preferred Gate Repair Company
Davie isn’t a typical South Florida suburb, and we don’t treat it like one. The town still runs on horse properties, ranches, and multi-acre lots, which means gates here are heavier, older, and more exposed to weather than the aluminum driveway gates you see in denser cities. We know the difference between a gate that needs a hinge adjustment and a gate whose post footing has failed in saturated ground. That local judgment is what keeps Davie customers calling us back.
Len Cavaretta built Sovereign Gate Repair around one standard: a gate that fails again isn’t a repair, it’s a callback. We service nine gate brands, including FAAC, BFT, Linear, and Viking, so we rarely tell a customer their system can’t be fixed. We handle electric gate diagnostics, not just mechanical fixes, which matters in Davie where lightning strikes and power surges take out control boards every summer. Our Gate Repair team works on residential driveway gates and commercial access systems under the same standard.
Styles & brands we work with





Metal Gate Repair in Davie
Metal gate repair in Davie usually means fighting rust, salt-laden humidity, and wind load on solid infill panels. Wrought iron and aluminum gates on Griffin Road or in Pine Island Ridge sit exposed to year-round moisture that eats ferrous components and corrodes hinges, latch hardware, and operator mounting brackets. A metal gate that won’t close cleanly is often a sign that the hinge post has shifted or the gate leaf itself has started to bow under repeated storm winds. We cut out rusted sections, reweld where the structure allows, and replace hardware with corrosion-resistant fittings rated for South Florida exposure.
Hinge and Post Repair
When a metal gate sags, the first thing we check is the post, not the hinge. Davie’s sandy subsoil loses bearing capacity after heavy rain, and even a properly installed post can lean enough to throw the entire gate out of alignment. We reset posts in concrete, shim and re-plumb the leaf, and rebuild hinge points so the gate carries its weight evenly again.
Weld and Rust Repair
Salt air works fast on ferrous metal, especially on horse properties near open pasture and standing water. We grind out rust pockets, reinforce weak areas with fresh steel, and treat the repaired zone to slow future corrosion. A homeowner in Davie can expect metal gate weld and rust repair to run $180 to $450 depending on how far the corrosion has spread.
Wood Gate Repair in Davie
Wood gate repair in Davie is a different animal from the rest of Broward. Ranch gates on Orange Drive and the rural-edged streets west of University Drive are heavy, custom-built, and often decades old. The wood expands and contracts with humidity, fasteners pull loose, and a gate that weighed 300 pounds when it was built now sags under its own soaked weight. We sister in new framing, replace rotted rails, re-hang the gate on reinforced hinges, and brace the leaf so it doesn’t twist in the next storm.
Ranch Gate Restoration
On large lots, a wooden gate is often part of the property’s working perimeter, not just a driveway feature. We rebuild these gates in place when possible, keeping the original look while replacing the structural members that have failed. The goal is a gate that opens smoothly without losing the character the homeowner built it for.
Realignment and Sag Correction
Wood gates sag for two reasons in Davie: the post sinks in wet soil or the gate’s diagonal bracing has failed. We correct both. A typical wood gate realignment runs $160 to $380. Adding post reset work to a sunken footing typically pushes the job to $400 to $750 depending on the post depth and concrete work involved.
Trusted Brands We Service in Davie
We’re factory-familiar with nine gate brands, and around Davie we see a lot of FAAC and BFT on commercial and HOA entry gates, plus Linear and Viking on residential estate systems. We keep common replacement parts in our service vehicles, so a control board swap on a FAAC community gate or a limit switch adjustment on a Viking operator doesn’t mean waiting on a parts order. Electric gate diagnostics on these systems is a core discipline for us, not an add-on. That’s why we can tell a Davie customer whether their operator is truly dead or just mis-wired without throwing parts at the problem.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Davie Homes
- Sunken posts after heavy rain. Davie’s sandy, groundwater-heavy soil shifts fast when saturated, and a hinge post that drops two inches makes a swing gate drag or refuse to latch. We reset the footing in concrete rather than cranking the hinges as a workaround.
- Lightning-damaged control boards. Summer thunderstorms hit Davie hard, and exposed estate gates with long wire runs are prime targets for surge damage. We test the board, loop detector, and transformer to isolate the failure before recommending a repair.
- Rusted hinges and latch hardware. Salt-laden humidity from the Atlantic and the Everglades doesn’t just rust coastal properties. We see corroded hinge pins and seized latches on metal gates all over Davie, including newer installations with cheap hardware.
- Wind-torqued gates on open lots. Solid infill gates act like sails during storm downbursts, and the torque bends frames, snaps welds, and pulls operators off their mounts. We brace the structure and recalibrate the operator travel limits as one job.
Pricing for Gate Repair in Davie, FL
We quote every job before work starts, and the price you agree to is the price you pay. Typical metal gate hinge and alignment repair in Davie runs $180 to $340. Wood gate sag correction and re-bracing runs $160 to $380 without post work. Post resetting, which is the most common structural repair in Davie’s saturated soil, typically adds $250 to $500 depending on depth and concrete volume. Electric gate diagnostics start at $95 for the service call, and control board replacements on FAAC, BFT, Linear, or Viking systems run $300 to $800 including the part and labor. Call (855) 360-5979 for an exact quote, estimates are free.
We Also Serve Cities Near Davie
Our Gate Repair in Davie service area extends into the surrounding communities, including Broadview Park, Cooper City, Pine Island Ridge, and Melrose Park. If your gate is down in any of these nearby cities, you get the same multi-brand expertise and the same post-first approach we bring to every Davie job.
Serving Davie, FL — Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Davie
The problem is almost never the hinges. In Davie, sandy soil loses bearing capacity after rain, and the hinge post sinks or leans, pulling the gate leaf down with it. You can tighten hinges all day and the gate will keep sagging until the post is reset in concrete and the gate realigned. Call (855) 360-5979 for a post inspection and an honest answer about what’s actually failing.
Most automatic gate operators, including FAAC, BFT, Linear, Viking, LiftMaster, and DoorKing models, have a manual release handle or key on the operator housing. Look for a red handle, keyhole, or small lever near the motor, turn or pull it to disengage the drive, and push the gate open by hand. Never force a gate that has been damaged by wind, and if the release mechanism is seized from rust, call us rather than yanking on it.
First, check the breaker and any GFCI outlet on the circuit. If power is present and the operator still won’t respond, the control board likely took a surge and needs testing. Davie’s summer thunderstorms kill control boards on exposed estate gates regularly, and the repair usually means replacing the board and sometimes the transformer. Call (855) 360-5979 and we’ll diagnose it on site instead of guessing.
Yes. Solid infill gates on open Davie lots catch wind like a wall, and the torque from a downburst can bend frames, snap welds, and rip operators off their mounts. We brace gates for wind load, use heavier hinges on exposed properties, and recommend reinforced post footings for gates that face the prevailing storm direction. If your gate was built without wind load in mind, a retrofit is cheaper than replacing it after the next hurricane.
Yes, and we do it regularly. On a horse property off Orange Drive, we repaired a heavy wooden ranch gate that had been torqued by a storm downburst. The hinge post had sunk several inches in the saturated soil, causing the swing gate to drag. We reset the post footing with concrete, corrected the sag, and realigned the LiftMaster operator and safety photocells. The gate now opens smoothly and securely. If your ranch gate is dragging or twisting, call (855) 360-5979 for a free estimate.
Written by Len Cavaretta, Owner at Sovereign Gate Repair, serving Davie and South Florida’s gate systems since day one.