Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Lighthouse Point
Gate repair in Lighthouse Point usually costs between $185 and $520 depending on whether you’re dealing with a corroded hinge, a misaligned slide gate, or a failed operator near the Intracoastal. Most repairs on the finger canals take us under two hours once we’re on site. If your gate is binding, sagging, or dead after a storm, we can typically diagnose and repair it the same day. Call (855) 360-5979 for a free estimate, and we’ll give you a firm price before any work begins.
Why Sovereign Gate Repair Is Lighthouse Point’s Preferred Gate Repair Company
Lighthouse Point homeowners call us because their gates don’t fail quietly. A swing gate that won’t close on NE 31st Court or a slide gate grinding on its track off Lighthouse Drive isn’t just an inconvenience. It’s a security gap on a waterfront property. We’ve worked on enough canal-front homes here to know exactly what salt air does to operator housings and hinge posts, and we diagnose with that context from the first minute.
We’re certified to service nine gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Lighthouse Point because the housing stock runs from 1960s ranch homes with heritage gate hardware to newer Mediterranean-style builds with modern automation, and no single brand dominates. Whether it’s a Viking operator on a side-yard gate or a Ghost Controls system on a boat-dock entry, we work on the brand you already have rather than steering you toward a replacement.
Our electric gate repair is a dedicated specialty, not an add-on. Techs diagnose motor, control board, loop detector, and access system failures on the first visit. For Lighthouse Point properties, we also account for what the marine environment has done to the equipment, which saves you from a repair that lasts one season.
Styles & brands we work with
Iron Gate Repair in Lighthouse Point
Iron gate repair in Lighthouse Point usually means dealing with what the subtropical marine climate does to steel. We routinely see salt-pitted hinges, corroded weld joints, and rust creeping under powder coat on gates within a few hundred feet of the Intracoastal. Repairs on Lighthouse Point iron gates typically run $225 – $520 depending on how much metal needs cutting, welding, and refinishing.
The salt-laden onshore breeze off the Atlantic and Intracoastal constantly bathes iron gates in corrosive marine air. On the finger canals, we see hinge posts that look intact from the street but are rusted through at the base where sprinkler overspray meets salt residue. That’s the kind of failure that only shows up when the gate starts dragging.
Hinge and Post Repair
We replace seized hinge pins, cut out rusted post sections, and weld in new steel where the original material is compromised. We also reset posts that have shifted in saturated ground after heavy rain, then re-hang the gate to swing true.
Weld and Rust Repair
Surface rust gets ground back to clean metal, treated, and primed before refinishing. Structural rust at joints and gate corners gets cut out and re-welded with new plate steel, then blended to match the existing design.
Sliding Gate Repair in Lighthouse Point
Sliding gate repair in Lighthouse Point often comes down to track alignment and rack and pinion damage from wind-load and debris. When a solid infill slide gate catches a tropical storm gust, the force travels through the gate and bends the track or strips teeth off the rack. Typical sliding gate repairs here run $275 – $580.
Canal-front lots are tight. Many slide gates in Lighthouse Point run parallel to the water with limited setback, which means the track sits close to saturated ground and salt exposure. We see misaligned rollers, seized bearings, and corroded track bolts more often than motor failures on these systems.
Track Realignment
We straighten bent track sections, rebuild the roller assemblies, and reset the gate so it travels without friction. A slide gate that drags burns out motors faster, so alignment gets corrected before it becomes an operator replacement.
Rack and Pinion Replacement
Storm-driven debris and repeated wind loading damage nylon and steel racks. We replace stripped rack sections, re-time the pinion gear, and verify the gate runs its full travel without binding.
Trusted Brands We Service in Lighthouse Point
We carry parts for Viking, Ghost Controls, DoorKing, and Elite systems, among the nine brands we’re certified on. For Lighthouse Point customers that means we’re not waiting on a distributor shipment for common failure parts like loop detectors, control boards, and limit switches that fail in salt air. From Mighty Mule residential operators to commercial-grade FAAC and BFT systems, our techs diagnose and repair what’s on your property rather than recommending a brand change.
Common Gate Repair Problems We See in Lighthouse Point Homes
- Salt-air corrosion on operator housings. Homes on the finger canals get constant onshore breeze, and we see control boards and motor housings with corrosion that inland neighborhoods never develop. We replace the corroded hardware and seal the enclosure properly so it doesn’t recur.
- Saturated ground weakening post footings. After a heavy rain or king tide, Lighthouse Point soil holds water and footings shift. A swing gate that sagged after a storm is usually a footing issue, not a hinge issue.
- Storm-driven wind load on solid infill gates. Solid gates act like sails in hurricane-force wind. We see bent tracks, snapped hinges, and rack damage on slide gates after every named storm.
- Dead operators after power surges or outages. Lightning and grid flicker during storms take out control boards and transformers. We diagnose the board, the motor, and the loop detector, and we replace only what actually failed.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Lighthouse Point, FL
Gate repair in Lighthouse Point generally falls between $185 and $580. A hinge adjustment or limit switch replacement runs $185 – $275. A full operator replacement, board swap, or track rebuild runs $425 – $580. The biggest cost drivers here are salt corrosion damage (which adds labor for cutting and refinishing) and post footing resets in saturated soil, which require concrete work. We quote the full price before any work starts, and you approve it first. Call (855) 360-5979 for a free estimate on your specific gate.
We Also Serve Cities Near Lighthouse Point
Our Gate Repair in Lighthouse Point coverage extends to Pompano Beach Highlands, Tedder, Kendall Green, and Hillsboro Beach. If you’re in one of those areas and your gate is down, the same Gate Repair team that handles Lighthouse Point’s canal-front properties can get to you fast.
Serving Lighthouse Point, FL — Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lighthouse Point
Salt air corrodes operator housings, control boards, and hinge posts on canal-front properties within a few hundred feet of the Intracoastal, causing gates to bind and motors to strain. We see this on Lighthouse Drive, NE 31st Court, and most finger canals in 33064, and we replace the corroded hardware rather than slapping a patch over it. Call us at (855) 360-5979 and we’ll assess what the salt has done to your system.
Use the manual release lever on the operator to disengage the motor, then push the gate open by hand. The lever is usually on the side or bottom of the operator housing. If the gate still won’t move or feels seized, the post may have shifted or the track is jammed, and you should call us before forcing it. Forcing a seized gate can bend the arm or damage the operator, which turns a $200 repair into a $600 one. Call (855) 360-5979 and we’ll get it freed and re-secured.
Because the post footing has shifted in saturated ground. Lighthouse Point’s high water table and dense, moisture-holding soil mean footings settle after heavy rain or king tides. The fix is resetting the post footing and re-hanging the gate, not just tightening the hinges. We do post resets regularly on canal-front and near-waterfront lots throughout 33064. Call (855) 360-5979 for a footing assessment.
Yes, automatic gates in Lighthouse Point must have functioning safety sensors or safety edges that stop and reverse the gate when it contacts an obstruction. Florida building code and UL 325 require these devices, and we verify them on every repair. If your sensors are missing, damaged, or bypassed, we’ll replace them as part of the job. Call (855) 360-5979 and we’ll inspect your system properly.
We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. That covers the full range from DIY-installed Mighty Mule residential gates to commercial-grade FAAC and BFT automated systems. We’re brand-agnostic, so we repair what’s on your property instead of trying to sell you a replacement you don’t need. Call (855) 360-5979 and tell us what brand you have. If it’s on that list, we can fix it today.
We’re Here When Your Gate Stops Working in Lighthouse Point
We recently serviced a LiftMaster swing gate on a canal-front property off Lighthouse Drive where the homeowner reported the gate was ‘sticking’ after a storm. Our tech found the hinge post footing had shifted in saturated soil and the operator housing was salt-pitted, so we performed a sag correction by resetting the post footing and replaced the corroded hardware. The gate now swings freely and the operator runs smoothly, ready for the next hurricane season.
That’s the Sovereign-standard approach: complete solutions, not temporary patches. Whether your gate is a hurricane-season secure point on the finger canals or a pool-safety barrier off NE 27th Avenue, we’ll diagnose it correctly and repair it so it stays working. Call (855) 360-5979 for a free estimate on any gate repair in Lighthouse Point. The price is agreed before we touch a tool.
Written by Len Cavaretta, Owner at Sovereign Gate Repair, serving Lighthouse Point since day one.