Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in North Lauderdale, FL
Gate installation in North Lauderdale usually runs between $2,800 and $11,000 depending on the gate type, automation package, and whether the old post footings can be reused or need to be re-poured. Most homes in 33068 were built between the 1960s and 1980s, and that means the existing driveway setup was not designed for a modern automated sliding or swing gate. Sovereign Gate Repair has served North Lauderdale since 2015, and we handle everything from a simple aluminum swing gate replacement to a full commercial-grade access system. Call (855) 360-5979 for a free measure and a written price before any work is scheduled.
Why North Lauderdale Homes Are Different
North Lauderdale’s housing stock is dominated by modest single-family ranch homes and small multifamily buildings from the 1960s through the 1980s. Many of these properties still have their original metal driveway gates, and the older ranch subdivisions are packed tight, with narrow driveway entrances and shallow concrete post footings. The sandy soil underneath North Lauderdale shifts after decades of heavy summer rain, which means hinge posts lean, gates sag, and operators bind against the rack or track. A gate that closes fine in January can drag by July.
The climate works against metal and electronics at the same time. Year-round humidity, daily summer thunderstorms, and salt-laden air off the Atlantic corrode steel hinges, rust out chain-link frames, and shorten the life of control boards mounted in unsealed enclosures. We routinely see operators in North Lauderdale where the board has failed from moisture intrusion rather than a bad motor. That is why we use galvanized or aluminum hardware on every replacement and mount control boxes in moisture-resistant enclosures as standard practice. Older wrought-iron gates are beautiful, but in 33068 they demand rust treatment, re-welding, and regular hinge service to stay square.
The tight lot lines also change how we install. When the gate and the property line are only a few feet apart, a slide gate makes more sense than a swing gate that arcs into the neighbor’s driveway or a sidewalk. North Lauderdale homeowners cannot afford an access problem that blocks the only car entrance, so our work here is planned around keeping that driveway usable during the install.
Styles & brands we work with
Our Main North Lauderdale Services
North Lauderdale homeowners call us for two things more than anything else: getting a failing gate working again the same day, and diagnosing an electric operator that stopped responding. Both live on their own pages, but here is the short version of how we handle them in 33068.
Gate Repair in North Lauderdale
Most gate repair in North Lauderdale starts with sagging hinges and posts that have leaned in the sandy soil. We reset posts in new concrete, re-align the gate leaf, replace rusted hardware with galvanized or aluminum parts, and weld cracks in wrought-iron frames. When the damage is from decades of humidity and salt air, we treat the rust rather than painting over it, because a patch job just comes back. Same-day service is the normal expectation here, and we keep the parts that fail most on North Lauderdale gates on the truck. Read the full breakdown at Gate Repair in North Lauderdale.
Electric Gate Repair in North Lauderdale
Electric gate failures in North Lauderdale are usually not the motor. Moisture in the control board, a loop detector that stopped sensing the car, or a limit switch that drifted out of adjustment are the typical culprits. We diagnose the full system, including the power run, the safety edges, and the access keypad or intercom, rather than throwing a new board at the symptom and hoping. From Mighty Mule residential units to commercial FAAC systems, the fix is brand-agnostic. Details at Electric Gate Repair in North Lauderdale.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in North Lauderdale
Gate installation in North Lauderdale means working with what the original builder left behind. Most 33068 homes have a narrow driveway entrance, a shallow post footing, and no conduit run for a future operator. We handle the complete job: removing the old gate and posts, digging and pouring deeper footings, hanging a new aluminum or steel gate, and running the low-voltage power for automation. Gate Installation is not a drop-in replacement here; it is measured against the lot, the soil, and the access pattern.
Automatic Gate Installation
Signs you need it
You are getting out of the car to open and close the gate in the rain, or the existing chain-drive operator has failed and the parts are no longer made.
What it costs in North Lauderdale
Automatic gate installation in North Lauderdale typically runs $4,200 to $9,500, including the operator, safety sensors, and the power run to the gate.
How we do it
We set the operator on a reinforced pad, run the low-voltage conduit, mount the safety edges and photo eyes, program the travel limits, and test the full cycle with the remote and keypad.
Driveway Gate Installation
Signs you need it
The existing gate is rusted through at the bottom rail, the hinges have torn out of the post, or the gate no longer matches the security needs of the property.
What it costs in North Lauderdale
A new driveway gate in North Lauderdale, installed on re-poured posts, typically ranges from $2,800 to $7,000 depending on width, material, and whether it is a swing or slide.
How we do it
We remove the old leaf, dig and pour deep post footings, hang the new gate with adjustable galvanized hinges, and align the leaf so it holds its arc through the full range.
Sliding Gate Installation
Signs you need it
A swing gate would arc across the neighbor’s driveway or into a sidewalk, or you have a narrow entrance where a cantilever slide is the only practical option.
What it costs in North Lauderdale
Sliding gate installation in North Lauderdale typically runs $4,800 to $11,000, including the track or cantilever hardware, the gate leaf, and the operator.
How we do it
We set the track or cantilever rollers on a level footing, hang the gate panel, install the operator and rack, wire the safety loops, and adjust the speed and limits.
What Gate Installation Costs in North Lauderdale
| Item | Typical range in North Lauderdale |
|---|---|
| Driveway gate, swing, aluminum, installed | $2,800 – $7,000 |
| Automatic gate package with operator, safety edges, and keypad | $4,200 – $9,500 |
| Sliding gate with operator and track | $4,800 – $11,000 |
How long does a gate installation take in North Lauderdale?
Most single-gate installations take one to two days on site, plus about a week of lead time to order the gate panel and operator. Concrete needs a day to cure before we hang the leaf.
Do you handle the power run and safety sensors?
Yes. The power run, safety edges, photo eyes, and loop detection are part of the automatic gate installation. We do not leave you to find an electrician for the low-voltage work.
Brands We Service in North Lauderdale
We work on the brand you already have. In North Lauderdale that includes FAAC, BFT, Linear, and Viking operators, both residential and commercial. Common boards, remotes, safety edges, and limit switches for these brands are kept stocked for the area, which keeps most repairs to a single visit. We are factory-familiar with nine gate brands and we do not steer you toward a replacement just because a product line is older. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in North Lauderdale, FL
| Service | Typical range in North Lauderdale |
|---|---|
| Gate repair, basic hinge and alignment | $180 – $340 |
| Gate repair, post reset and re-concrete | $450 – $900 |
| Electric gate diagnostic call | $95 – $175 |
| Control board replacement | $450 – $1,200 |
| Operator replacement, residential | $1,200 – $2,800 |
| Operator replacement, commercial | $3,500 – $7,500 |
| Safety edge or photo eye replacement | $220 – $450 |
| Gate installation, swing, aluminum | $2,800 – $7,000 |
| Automatic gate installation, full package | $4,200 – $9,500 |
| Sliding gate installation with operator | $4,800 – $11,000 |
What pushes a North Lauderdale price up is usually the post work. Shallow footings from the 1960s and 1970s often need to be dug out and re-poured before a new gate can be hung, and that labor and concrete adds a few hundred dollars. On electric work, a water-damaged control board that is no longer made can require a full retrofit. Every job is quoted and agreed before any work starts, so the number we give you is the number on the invoice.
Neighborhoods We Serve in North Lauderdale
Sovereign Gate Repair covers all of 33068. We run calls into every pocket of the city, including:
- Boulevard Woods
- North Lauderdale Village
- The Hamptons
- Silver Lakes Village
- The Fairways
Response across North Lauderdale is same-day for repair calls when we have a technician in the area, and we schedule installation measures within the week.
Service Area – Cities Near North Lauderdale
We also serve the communities around North Lauderdale. If you are across the line in Palm Aire, FL, Margate, FL, Tamarac, FL, or Coconut Creek, FL, the same crews and the same stocked parts cover your gate. The diagnosis approach does not change at the city line.
Serving North Lauderdale, FL — Our Local Coverage Area
We’re based in the North Lauderdale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Lauderdale
Automatic gates generally require a permit because they involve electrical work and safety devices, while a manual gate on existing posts usually does not. We can tell you what applies to your specific street and handle the permit paperwork on automatic installs.
Most mechanical repairs and many electric diagnostics can be handled same-day when you call before noon. If the part is a commercial board we do not keep on the truck, it is usually one to two business days to source.
Yes. North Lauderdale has a lot of small multifamily and HOA-managed properties with shared access gates, and we service those under the same brand-agnostic approach. We can provide a written quote for the association and schedule the work around access hours.
If your gate is sagging, stuck, or the operator stopped responding, call (855) 360-5979 for a free estimate. We will measure it, quote it, and fix it as a complete solution, not a patch.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Lauderdale Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Keisha Carter"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Marisol Ramirez"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Yolanda Guzman