Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in North Palm Beach, FL
Gate installation in North Palm Beach means working with 1950s – 1970s ranch homes, walled courtyards, and low-rise condo entries where salt air has been eating at metal for decades. Most jobs we take on involve replacing a rusted manual gate with an automated system, or swapping a failed operator on a community entry that mixes original and replacement hardware. The work here is less about the basic install and more about getting posts set straight in sandy soil, choosing hardware that won’t corrode in two years, and matching a new operator to an older gate frame. Call (855) 360-5979 and we’ll tell you what’s actually involved.
Why North Palm Beach Homes Are Different
North Palm Beach sits in a low-rise waterfront pocket where Atlantic salt air and year-round humidity press on every piece of exterior metal. That 1960s courtyard gate on Lighthouse Drive and that sliding entry on the Intracoastal side both face the same enemy: corrosion that starts small and spreads into hinges, track rollers, and operator internals. Waterfront lots mean sandy soil that shifts after heavy rain or a hurricane, and we routinely find gate posts leaning just enough to bind a track or throw off a sensor beam. Many properties have private boat docks, which means gate placement often has to work around pavers, landscaping, and narrow side yards that weren’t designed for automation. Community entries around the village often combine a 1970s swing operator with a newer control board and an older keypad, so diagnosing them requires knowing which parts are original, which are replacements, and how they interact. That mixed-age hardware is the single biggest reason North Palm Beach gate work keeps getting quoted wrong by companies that only know new systems.
Styles & brands we work with
Our Main North Palm Beach Services
Two services dominate the calls we get from North Palm Beach: mechanical gate repair and electric gate repair. One fixes what you can see, the other fixes what you can’t, and a surprising number of jobs need both.
Gate Repair in North Palm Beach
A sagging gate, a wheel that’s jumped its track, a post that’s drifted out of plumb after a storm – those are the mechanical failures we handle most often in this village. Coastal corrosion ages hinges and rollers faster than inland, and many 1960s-era gates were built with steel hardware that was never meant for salt air. We re-set posts, re-level tracks, replace corroded hardware with marine-grade equivalents, and adjust gates so they close cleanly without binding. When a gate frame itself is too far gone, we’ll tell you honestly before quoting a patch that won’t hold. Gate Repair in North Palm Beach covers what a physical fix involves.
Electric Gate Repair in North Palm Beach
When an automated gate stops responding, hums without moving, or opens halfway and reverses, the cause is usually electrical – a motor, a control board, a loop detector, or a power issue. Humidity and salt exposure shorten the life of circuit boards and connections in North Palm Beach more than almost anywhere else in Palm Beach County. We work on the brand you already have rather than telling you it’s unsupported, and we diagnose the actual fault before recommending any replacement. Electric Gate Repair in North Palm Beach details what diagnostics and repair involve here.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in North Palm Beach
Installing a gate in North Palm Beach means planning for salt air, sandy soil, and hurricane wind from day one. Most homes here were built between the 1950s and 1970s, and original gates were simple steel or aluminum frames that were never automated. When homeowners now want an automatic driveway gate or a sliding entry for a walled courtyard, the job starts with questions most installers skip: Is the existing post set deep enough in sandy soil to hold an operator? Does the gate frame have enough structural steel to carry a motor without twisting? Will the hardware survive salt exposure, or will it be rusted within three years? Our approach is to answer those questions before any work starts. We supply and install gate systems across residential and commercial properties, and whether it’s a Mighty Mule-style residential package or a commercial-grade FAAC or BFT operator, we treat the install as a complete solution rather than a mounting job that someone else will have to fix later. For a broader look at what installation work includes, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You want a driveway or courtyard gate that opens without stepping out of the car, or an existing gate is mechanically sound but has no motor.
What it costs in North Palm Beach
Automatic gate installation typically runs $3,500 – $8,500 depending on gate size, operator type, and the electrical run from the house.
How we do it
We mount the operator, set the gate stops, run the power and control wiring, install a keypad or remote receiver, and set the opening and closing force limits.
Electric Gate Installation
Signs you need it
You have a new gate that needs a motor and access system, or you’re replacing an older manual gate with a fully automated one.
What it costs in North Palm Beach
Electric gate installation starts around $2,500 and can reach $7,500 when it includes loop detectors, a keypad, and a new operator.
How we do it
We run the power supply, mount the operator and control board, wire the safety sensors, program the remotes and keypad, and test the full cycle repeatedly.
Driveway Gate Installation
Signs you need it
Your driveway is open to the street and you want a physical barrier that’s designed for daily vehicle use.
What it costs in North Palm Beach
Driveway gate installation typically cost $3,000 – $9,000 because it includes the gate, posts, operator, and concrete or steel work.
How we do it
We set or reinforce the posts, hang the gate, mount and wire the operator, install safety edges, and adjust the travel limits for a clean close.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your setback is too tight for a swing gate, and you want an automated sliding panel.
What it costs in North Palm Beach
Sliding gate installation typically runs $4,000 – $12,000, with the higher end covering long panels, heavy steel framing, and a track bed.
How we do it
We pour or repair the track bed, mount the roller truck and gate panel, install the motor and rack, and set the limits and safety stops.
What Gate Installation Costs in North Palm Beach
| Item | Typical range in North Palm Beach |
|---|---|
| Automatic gate installation | $3,500 – $8,500 |
| Electric gate installation | $2,500 – $7,500 |
| Driveway gate installation | $3,000 – $9,000 |
Do you install gates on older North Palm Beach homes?
Yes. Most of our installation work in North Palm Beach involves 1950s – 1970s homes with original gate posts and narrow side yards. We adapt the install to the existing structure rather than forcing a new gate into a layout it wasn’t built for.
How long does a gate installation take in North Palm Beach?
Most residential installs take one to two days once materials are on site. Permit reviews, HOA approval, and coastal-grade hardware orders can add time before work starts. We confirm the schedule before any work begins.
Brands We Service in North Palm Beach
We service and install FAAC, BFT, Linear, and Viking systems, among others. Parts for these brands are stocked locally, which means a repair on a North Palm Beach property doesn’t stall waiting on a regional distributor. See our brands for the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in North Palm Beach, FL
| Service | Typical range in North Palm Beach |
|---|---|
| Gate repair (mechanical) | $150 – $650 |
| Electric gate repair | $200 – $900 |
| Automatic gate installation | $3,500 – $8,500 |
| Electric gate installation | $2,500 – $7,500 |
| Driveway gate installation | $3,000 – $9,000 |
| Sliding gate installation | $4,000 – $12,000 |
| Gate opener installation | $850 – $3,200 |
| Gate opener repair | $175 – $650 |
Salt-corrosion damage and post realignment are the two biggest price drivers in North Palm Beach. We quote the full price before any work starts, and we don’t add surprise line items when we open a control box.
Neighborhoods We Serve in North Palm Beach
We cover all of ZIP code 33408 and the surrounding village, including waterfront streets near the Intracoastal and the older ranch-home blocks west of US-1. Response times are typically same day or next morning for urgent gate failures.
- North Palm Beach Village
- Lakeside Park area
- Canal streets near the Intracoastal
- Prosperity Farms Road corridor
- Golf course communities off Northlake Boulevard
Service Area – Cities Near North Palm Beach
We also work across the surrounding communities in northern Palm Beach County. If you’re in Lake Park, FL, just south of the village, or Palm Beach Shores, FL on the barrier island, we can schedule the same week. We serve Riviera Beach, FL and the residential neighborhoods south of Blue Heron, and we regularly cross into Palm Beach Gardens, FL off Northlake Boulevard. Call and we’ll confirm when a tech can be at your property.
Serving North Palm Beach, FL — Our Local Coverage Area
We’re based in the North Palm Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Palm Beach
For a stuck-open or stuck-closed gate at a North Palm Beach home, we usually arrive the same day or by the next morning. We prioritize security failures where a gate can’t close or block access to a property. Call (855) 360-5979 and we’ll give you a realistic arrival window.
In many North Palm Beach projects, gate and operator work falls under the village’s building permit rules, especially for new automatic installations or property-line changes. We handle the paperwork and confirm requirements before we start, so you don’t have to chase down the village yourself.
Yes. We work with property managers and HOAs in North Palm Beach on community entry gates, including older sliding and swing systems on shared driveways. We coordinate access, scheduling, and compliance with association rules, and we quote before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Palm Beach Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Brian Pruitt"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Shanice Grant"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Oscar Morales